Simply measure from the inside edge of the window/door frame on one side to the inside edge of the window/door frame on the other side. Add 60mm to each blind. Enter this measurement into the website. For the drop measurement simply measure from the top of the window/door frame to the floor and add 40mm and select “Outside Mount”. By adding the 60mm to each blind will increase your chance of finding a timber stud behind the plaster. If you are fitting this way please let us know in the notes section of the ordering process. We will supply both longer screws to reach the timber and also hollow wall anchors so you can still fit your blinds even if there is no timber behind the plaster. Check if the blind will clear the door handles, if not you may want to do a front roll and the blind will project out approximately 70mm from the architrave.
